Acknowledgement to Reviewers in 2003

The review process is the critical activity which controls the quality and appropriateness of papers published in The International Journal of Fluid Power. To ensure that only work of highest quality is accepted, it is important that each manuscript be carefully reviewed by the most competent scientists in the appropriate area of specialty. The International Journal of Fluid Power would like to thank all reviewers listed below for their support in the year 2003.

Prof. Torben O. Andersen Aalborg University, Institute of Energy Technology, DENMARK	Prof. Peter Beater University of Applied Sciences Südwestfalen, Department of Mechanical Engineering - Automation, GERMANY
Prof. Guido Belforte Technical University of Torino, Department of Mechanical Engineering, ITALY	Dr. Hans Berg Germanischer Lloyd, Hamburg, GERMANY
Dr. Lawrence Blackman Parker Aerospace, Abex Division, Kalamazoo MI, USA	Prof. Massimo Borghi DIMEC-University of Modena and Reggio Emilia, ITALY
Prof. Richard Burton University of Saskatchewan, Department of Mechanical Engineering, CANADA	Prof. Guiseppe Cantore DIMEC-University of Modena and Reggio Emilia,, ITALY
Prof. Peter John Chapple NTNU Norwegian University of Science and Technology, Institute of Thermal Energy and Hydropower, Trondheim, NORWAY	Prof. Esteve Codina Technical University of Catalonia, Department of Fluid Mechanics, SPAIN
Prof. Finn Conrad Technical University of Denmark, Department of Dontrol and Engineering Design, Lyngby, DENMARK	Prof. Dean Kim Bradley University, Department of Mechanical Engineering, USA
Prof. Reg Dunlop University of Canterbury, Department of Mechnical Engineering, NEW ZEALAND	Prof. Kevin Edge University of Bath, Department of Mechanical Engineering, Centre for Power Transmission and Motion Control, UK
Prof. Saeid Habibi University of Saskatchewan, Department of Mechanical Engineering, CANADA	Prof. Heikki Handroos Lappeenranta University of Technology, Department of Mechanical Engineering, FINLAND
Prof. Yasuhiro Hayakawa Nara College of Technology, Department of Control Engineering, JAPAN	Prof. Salvador de las Heras Technical University of Catalonia, Department of Fluid Mechanics, SPAIN
Dr. Horst Hesse Ingenieurbüro für Hydraulik, Stuttgart, GERMANY	Prof. Kalevi Huhtala Tampere University of Technology, IHA Institute of Mechanical Hydraulics and Automation, FINLAND
Prof. Ken Ichiryu Tokyo University of Technology, School of Engineering, Department of Mechatronics, JAPAN	Dr. Jaroslav Ivantysyn Sauer-Danfoss GmbH, Neumünster, GERMANY
Dr. Mohieddine Jelali Betriebsforschungsinstitut (BFI), VDEh-Institut für angewandte Forschung GmbH, Department Plant and System Technology, Düsseldorf, GERMANY	Dr. Nigel Johnston University of Bath, Department of Mechanical Engineering, Centre for Power Transmission and Motion Control, UK
Prof. Kenji Kawashima Tokyo Institute of Technology, Precision and Intelligence Laboratory, JAPAN	Dr. Markus Kliffken Bosch-Rexroth AG, Elchingen, GERMANY
Prof. Ato Kitagawa Tokyo Institute of Technology, Department of Control & Systems Engineering, JAPAN	Prof. Hideki Yanada Toyohashi University of Technology, Department of Mechanical Engineering, JAPAN
Prof. Eiichi Kojima Kanagawa University, Faculty of Engineering, Department of Mechanical Engineering, JAPAN	Prof. Kari T. Koskinen Tampere University of Technology, Institute of Hydraulics and Automation, FINLAND
Prof. Gary W. Krutz Purdue University, Department of Agricultural and Biological Engineering, USA	Prof. Michel Lebrun University of Claude Bernard/Lyon I, Department of Mechnical Engineering, FRANCE
Prof. Noah Manring University of Missouri-Columbia, Mechanical and Aerospace Engineering, USA	Dr. Stefano Mauro Technical University of Torino, Department of Mechanical Engineering, Italy
Dr. Massimo Milani DIMEC-University of Modena and Reggio Emilia, ITALY	Prof. Takayoshi Muto Gifu University, Department of Mechanical and Systems Engineering, Japan
Prof. Nicola Nervegna Technical University of Torino, Department of Energetics, ITALY	Prof. Takao Nishiumi National Defence Academy, Dept. of Mechanical Systems Engineering, Yokosuka, JAPAN
Prof. Toshiro Noritsugu Okayama University, Faculty of Engineering, Department of Systems Engineering, JAPAN	Prof. Petr Noskievic Technical University of Ostrava, Faculty of Mechanical Engineering, CZECH REPublic
Prof. Hidetoshi Ohuchi Yamanashi University, Department of Mechanical Engineering, JAPAN	Dr. Roberto Paoluzzi IMAMOTER - C.N.R. Institute for Agricultural and Earthmoving Machinery of the Italian National Research Council, Cassana (Ferrara), ITALY
Prof. Terenziano Raparelli Technical University of Torino, Department of Mechanics, ITALY	Prof. Jari Rinkinen Tampere University of Technology, Institute of Hydraulics and Automation, FINLAND
Prof. Karl-Erik Rydberg Linköping University, Department of Mechanical Engineering, Devision of Fluid Power Technology, SWEDEN	Prof. Kazushi Sanada Yokohama National University, School of Engineering, Department of Mechanical Engineering, JAPAN
Prof. Rudolf Scheidl University of Linz, Institute for Mechanics and Machine Design, AUSTRIA	Prof. Greg Schoenau University of Saskatchewan, Department of Mechanical Engineering, CANADA
Dr. Günther Starke APS GmbH, European Centre for Mechatronics, GERMANY	Prof. Jacek S. Stecki Monash University, Department of Mechanical Engineering, Subsea Engineering Research Group, AUSTRALIA
Prof. Bernd Stoffel Technical University of Darmstadt, Department of Turbomachinery and Fluid Power, GERMANY	Prof. Jaroslaw Stryczek Technical University of Wroclaw, Faculty of Mechanical Engineering, POLAND
Sheila L. Vieira University of Toledo, M.I.M.E Department, USA	Prof. Eizo Urata Kanagawa University, Faculty of Engineering, Department of Mechanical Engineering, JAPAN
Dr. Andreas Vahl Airbus Industries, Hamburg, GERMANY	Prof. John Watton Cardiff University, Division of Mechanical Engineering, UK
Prof. Hironao Yamada Gifu University, Department of Mechanical and Systems Engineering, JAPAN

BACK